Home | Our History | Company mission | Operative offices | Quality & Certificates | Exhibitions | Meet us | Contact us
Monday, 22 September 2014
CUSTOMER CARE
Catalogues
NEWS!

Product Catalogue
High T.E.C. Manual Spray Guns
Manual Spray Guns
HVLP Manual Spray Guns
High T.E.C. Automatic Spray Guns
Electrostatic Equipment
Low Pressure Paint Pumps
Airless Paint Equipment
Extrusion Equipment
Air Assisted Airless Paint Equipment
Bellows Paint Pumps
Stainless Steel Paint Pressure Tanks
Heating Systems
Cleaning Systems
Operators Protection
Accessories
Two-components Equipment
Airgunsa
Airbrushes Series
Air Compressors
ANEST IWATA U.K. Ltd.
7 Chester Road, Colmworth Business Park
Eaton Socon ,St. Neots,
Cambridgeshire - PE19 8YT
Tel. +44 (0)1480 40 54 19
Fax: +44 (0)1480 21 76 10
VAT 02822550


Heating Systems


The use of short wave infrared technology enables body fillers, primers and paints to be cured in typically 10 minutes as opposed to 45 minutes in an oven.
Anest lwata infrared mobile drying systems provide a fast efficient answer for all your local body repairs.
Infrared units provide a cost effective method of paint drying and curing can be achieved in just minutes, using the highly effective short wave infrared lamp.
Anest Iwata infrared units are available in a number of options allowing you to choose the most convenient model for your bodyshop.
HEAT T.E.C. HL 1000 infrared drying unit
Heat T.e.c. HL 1000 is a mobile unit used for rapid paint curing.

HLP 1000
Hand held model
HLP 1000S
Hand held model with separate stand
HLP 1000T
Two hand held models with one stand

Download brochureDownload Manual
Anest Iwata is pleased to announce the launch of a new Infra product to compliment the existing excellent range. The new 1.5Kw 750mm cassette is ideal for drying sills, bumpers and lower area of the vehicle due its new fixing bracket which also swivels.

New swivel joint makes the repair process nice and easy

- Dimensions: 750mm x 140mm x 85mm
- Electrical Specification, 220/240.
- Volts: 1.5Kw
- Single Phase.

- New 750mm cassette head is perfect for longer areas, including sills and bumpers.

- The new swivel joint and locking devise means you can now adjust to any angle required. Great for drying windscreen pillars and back of top quarters.

- No handle on the back makes the 1.5KW infra red easy to lower to the floor to dry those difficult hard to reach areas.

Download brochure

HEAT T.E.C HL 3000 infrared drying unit
main specifications

Minimum operating distance: 500 mm
Area coverage: 800 x 1000 mm
Max vertical curing height: 2030 mm
Max horizontal curing height: 1800 mm

Download brochureDownload Manual
HEAT T.E.C HL 4000 infrared drying unit

main specifications

Minimum operating distance: 500 mm
Area coverag : 800 x 1300 mm
Max vertical curing height: 2030 mm
Max horizontal curing height: 1800 mm

Download brochureDownload Manual

HEAT T.E.C HL 4500 infrared drying unit

main specifications

Minimum operating distance: 600 mm
Area coverage: 1000 x 1250 mm
Max vertical curing height: 2150 mm
Max horizontal curing height: 1800 mm

Download brochureDownload Manual
HEAT T.E.C HL 6000 infrared drying unit

main specifications

Minimum operating distance: 600 mm
Area coverage: 2000 x1000 mm
Max vertical curing height: 1800 mm

Download brochureDownload Manual
PAINT HEATER
THE PAINT HEATER MODEL 32X1R AND 32X2R

This equipment has been designed to solve the problem of the low temperatures while painting, consequently:

Considerable reduction of paint viscosity
Major thickness of paint film and less fluid passages
Reduction of pressure and better spray atomisation
Reduction of solvent consumption
Reduction of drying time.

The paintheater has been designed in observance of the antideflagration regulations, it also allows to use of various kinds of paints and solvents, thanks to the stainless steel utilisation.

Download brochureDownload Manual


AQUADRY PAINT DRYER
INDISPENSABLE KIT FOR THE ACCELERATION OF FLASH OFF OF WATERBASED COATINGS

The stand has a slide and lock height adjustment.
The gun brackets can be moved along the length of the arm and positioned to suit.
Each arm can be used independently
The guns are provided with quick couplings which allow fast disassembling
Guns are easily adjustable
Venturi air entrainment increases air flow by 6:1
The guns are provided with quick couplings which allow fast disassembly
Air regulator included
Guns are easily orientable
The stand has a slide and lock height adjustment. The gun brackets can be moved along the length of the arm and positioned to suit.
The height of stand is 180 cm
The width of arm is 80 cm (38,5 each side), and it stands 2 aquadry guns
Variable airflow
Max pressure: 7 bar
Max air consumption: 2 x 600 l/min

Download brochureDownload Manual




Top ^  
Anest Iwata Europe s.r.l. 1998 - 2008 - Use, copy, diffusion of pictures, data and text are not permitted without authorization.